Log in or Create an account

Total £0.00 · Choose your currency

Total £0.00 · Choose your currency

Developed by longboarders for over a decade, Lush Longboards Slide Gloves are the benchmark by which all others are measured. Built to last with a blend of leather and synthetics, all held together with super-strong COATS thread.

We continuously update our gloves with minor tweaks to the cut, shape and fit as our team continues to find new ways to destroy them. We don't think you will find a better fitting, longer lasting longboard glove anywhere.

Use the table below to check you size before you buy - a close fit is super important for slide gloves to stop them catching on the road!

Approx. Glove Size XS S M L XL
Hand Span Length 18.5cm 19cm 19.5cm 20cm 20.5cm
Hand Span Width 9.5cm 10cm 10.5cm 11cm 12cm


Camber Profile

For flexy boards, we use a Cambered profile. We’ve used camber in various longboards for over a decade – there’s no better way to produce a lively flex from wood.

It gives you:

  • A springy flex, as the veneers are “pre tensioned” against your weight in the press, the deck “springs” out of carves and gives a super-nice carving feeling. If you’re into surfing and snowboarding – you will like it!
  • A slightly higher ride height which equates to more lean and a better turn on your trucks.

If you want to carve it up… Camber is the way to go.

Back up to the Boards!


Rocker Profile



We love a bit of rocker on our longboard decks here at Lush… we first introduced it to our lineup back in 2010 and haven’t looked back since.

A rockered profile on a longboard brings the skater’s knees together, helping centre weight and improving board feel. It also helps lock your feet into the board, and the board is essentially concaved along its length as well as across its width. A great alternative to a microdrop or drop-down profile, we’re all about board feel in our decks and we think once you’ve skated rocker, you’ll never go back to anything else… click here for more info!

Back up to the Boards!


3D Rocker Profile

Our 3D Rocker profile bends Maple as far as possible to create foot locking concave and ultimate board feel.

Rocker by itself brings your knees together as you skate, adding board feel and helping you centre your weight. We’ve added 3D wheel flares to prevent wheelbite and give your feet reference points and extra leverage – you’ll really notice the benefits on freeride and slide setups. Click here for more info!

Back up to the Boards!


4X Composite


We want our downhill and race decks to be as stiff and tough as possible. Stiffer boards track corners better and slide smoother, and we’ve seen what can happen to a deck when it’s been thrown into an armco barrier at 50mph…!

To achieve these characteristics we use our 4X construction – a composite layup of Maple and bi-axial fibreglass, cunningly offest to create maximum torsional stiffness and a minimal, damped lengthways flex to absorb road vibration. Our 4X Construction is also legendary for its toughness… we’ve seen these boards take punishment like nothing else on the market. Click here for more info!

Back up to the Boards!


X Flex Composite


A composite of Fibreglass and Maple, held together with Epoxy glue, we use X-Flex to create flexy longboards with a springy flex and unparalleled energy return.

By burying the fibreglass into the layup we dampen the flex pattern a little, creating a lively, controlled flex, which will give you that carving feeling that we know you’re craving if you surf or snowboard. Click here for more info!

Back up to the Boards!


Drop Through Trucks

We were one of the first longboard companies to start making longboards with drop-through truck mounts, way back in the early 2000’s with some of our early speedboards. We were also the first to use this truck mounting on a flexier cruiser board, starting a trend which has snowballed since – the drop-through crusier shape has since become one of the “standard” longboard shapes alongside pintails and mini-cruisers.

Drop-through longboards skate lower, which means that they are more stable, slide more easily and predictably, and are easier to push and footbrake. As such, they make great boards for beginners who need to learn how to slide, push and brake effectively.

Our adjustable drop-through mount takes this innovation one step further. By lengthening the cutout and adding two extra holes, we can give you a small amount of wheelbase adjustment, allowing you to optimise your ride to suit your style and setup. Click here for more info!

Back up to the Boards!


Adjustable Wheel Base

Several of our longboards feature a lot of wheelbase adjustment. We drill in several truck mounting options to allow you to change this all-important dimension of your setup to suit your riding style. Longer wheelbases increase stability and flow, shorter wheelbases increase grip and turn. Decks with a lot of wheelbase adjustment also feature longer wheel wells to match.

An adjustable wheelbase also allows you to choose the size of your nose and tail – so you can transform your deck from a longer downhill machine into a shorter freeride deck with a tail for ollies and kickturns. Click here for more info!

Back up to the Boards!


6 Ply Maple


Denotes 6 plies of Canadian Maple – very flexy and light!

We only make boards this thin when we’re supporting the wood with X-Flex. Longboards made using 6ply maple are very light for their size, and have a lot of bouncy flex – perfect for carving, cruising, pumping and dancing.

Back up to the Boards!


7 Ply Maple


Denotes 7 plies of Canadian Maple – generally pretty flexy on most longboard wheelbases.

7 plies of Canadian Maple has been the standard skateboard layup for decades. Used on a longboard with a longer wheelbase, it gives a nice mellow flex without adding too much weight to the deck. Maple is amazingly impact-resistant compared to cheaper woods, returns energy better and holds it’s flex for longer. If you’re using wood alone without any composite additions, you won’t find a better material to make longboards out of!

Back up to the Boards!


8 Ply Maple



Denotes 8 plies of Canadian Maple – medium stiffness on most wheelbases.

We use this layup on shorter freeride boards to save weight were 9 plies would be overkill. As long as the deck isn’t too long, 8 plies is plenty stiff enough for the smooth and predictable slides that we all love!

Back up to the Boards!


9 Ply Maple


Denotes 9 plies of 100% hardrock canadian Maple – for a stiffer flex.

We use 9ply Maple layups for stiffer freeride and downhill longboards, as stiffer decks slide smoother and track sweeping corners better. We’ll also use this layup when we want more strength in the deck to resist impact and abuse from freestyle/dancing tricks – this kind of longboarding is very hard on decks and we want ours to survive as long as possible!

Back up to the Boards!


Moulded Arches



Our newer longboard decks feature moulded wheel arches. Pressed in with the concave, this allows us to create really deep wheel wells without sacrificing any strength and keeping a cleaner look. Avoiding wheelbite has never been easier! Click here for more info.

Back up to the Boards!


CNC Wheel Wells

We use a CNC machine to cut wheel wells in our longboard decks when we want to make a very long or very deep well. Material is removed after the blank is pressed and shaped, allowing us to make wider topmount shapes whilst avoiding wheelbite.

We can also give a lot of wheelbase options with this technique, allowing you a lot of customisation options. Using CNC wheel wells we can make shapes that would otherwise be impossible, run our setups lower with looser trucks, and still keep wheelbite to a minimum. Click here for more info!

Back up to the Boards!