Split Angle Trucks
Get ready for the split angle revolution!
Total £0.00 · Your cart is empty
Get ready for the split angle revolution!
A split angle truck setup on a longboard is where you have two different truck geometries on the front and rear of the board, instead of the same truck at both ends.
The idea is to make a directional board steer from the front, like a car.
The front truck uses a steeper geometry, and is set up with softer bushings to make it as active and responsive as possible without getting wheelbite.
The back truck uses a slacker, more stable geometry, and is set up with harder bushings to create a stable platform for you to skate from.
We’re using Sabre Trucks and bushings to achieve this, with a 48 degree truck on the front and a 28 degree truck on the back. You can read more about their tech on sabretrucks.com.
Split angle setups are not a new idea.
Slalom skaters have been doing things like this for a few decades, and more recently we’ve seen the concept appear on downhill racing, long distance pumping and surfskates.
There are some pretty huge benefits:
What’s not to like?!?
We can pretty much guarantee that you’ll jump on a split angle setup and be blown away.
The difference between split angles and a traditional symmetrical setup is night and day. One of our first customers to try this described it:
“Either I got dramatically better out of nowhere or the set up worked like a dream and felt stable on the gentle slide road where it used to get twitchy. It just felt like a different road. Great fun…”
Imagine that your board can turn more than it used to, but it’s more stable at the same time. That’s what happens with split angles.
The dreaded speed wobbles are hugely reduced.
You’ll find it much easier to “pump” your board along, and accelerate without putting a foot down to push.
And if you’re like us, constantly looking for that feeling that other boardspots bring you, you’ll dig the extra lean and deeper carves that the slacker rear trucks brings.
As far as we’re concerned, this is the next step in the evolution of a longboard. We’re pretty sure that split angle truck setups will become standard on all decent longboards.
As we’ve mentioned, split angles are not a new idea. Racers and tweakers have known the benefits for years.
Split angle setups are a bit more complicated than just putting the same trucks at both end of your board. Wheel size, truck angle, riser height, bushing durometer and shape all have a part to play.
After a lot of playing around, we’re putting together split angle setups that just work, straight out of the box.
If you do need to change anything, its dead easy, thanks to Sabre’s comprehensive bushing offering.
If you’re getting wheelbite, you probably want a harder bushing.
If you want more turn, go softer.
Just get in touch if you need a hand!
Up to now, split angle setups have required a lot of experimenting, compromise and too often shelling out for very expensive truck systems.
We’re on a mission to bring all the benefits of setups like this to all skaters: no matter your ability or terrain, if your board is directional, this is for you and we are sure you will love it!
Great news – yes you can!
Even better news – it’s really cheap and easy to do!
If you have a Lush board with Sabre Longboard Trucks on it – that’s most of the boards we’ve made since 2009 – then all you need is a Split Angle Upgrade Kit.
By leveraging Sabre’s commitment to backwards compatibility, we’ve put together a simple kit that has everything you need to convert your existing Lush board (or any board with Sabres on!) to a split angle setup.
The kit contains:
All you need to do once you’ve got the kit is:
We’re super stoked to be able to offer this – a super easy and cost effective way to bring your board bang up to date.