Total £0.00 · Your cart is empty

Lush Longboards Samba Natural

About this product

Length
35.825" / 91cm
Width
9.25" / 23.5cm
Wheelbase
28.75" / 73cm
Tail
1.5" / 3.8cm
Construction
Maple and Hemp
Profile
Low Rider
Flex
Medium
  • Speed/Race
  • Cruise/Carve
  • Slide/Freeride
  • Bowls/Street
  • Dance/Flatland

The Board

The Legendary Lush Samba returns!

This board has been a part of the Lush lineup since the early 2000’s. Conceived around a kitchen table in the depths of winter in Sheffield, it’s a board that’s designed to do one thing – carve.

We believe in that the best products come with an iterative approach. Gradual improvement to a solid initial concept over a period of decades has, in this case, produced the deepest, carviest ride yet.

If you’ve been following us since those heady days of sawdust, good vibes and freerides, you’ll know that this the fifth iteration of this unique board. We’re reluctant to call it a “longboard” like a lot of the other boards we make… yes, it’s definitely bigger than a skateboard, but it’s not really like anything else out there.

Snowboard the streets

The Samba is a skateboard for surfers and snowboarders who like to carve. It’s not really like other longboards – the deck is designed to alter the truck geometry in such a radical way that the board just doesn’t skate like anything else with wheels.

With some unique truck and deck geometry, we have created a very turny, very leany ride which really does feel just like smashing some powder or the lip of a wave.

The unique ride feeling is really the reason for the Samba’s cult following, and is the product of many years of noodling about with trucks, bushings, angles and decks.

Truck and deck geometry

The trick to the Samba has always been it’s unique truck and deck geometry. This, however, is the first time that in nearly a quarter of a century of making these boards, that we’ve been able to design our own truck system from the ground up, specifically to give us the deepest carves out there.

In the past we’ve used all sorts of different truck angles… Seismic 35’s, Sabre 45’s, Sabre’s Forged 38 drop up… and we’ve tried many other brands and geometries in the hunt for the perfect carve. Now we’ve gone even slacker, with the new Sabre 28 degree baseplate. That super low angle translates directly into even more lean than before… if you like to bury a rail in the water or snow, this is the best Samba yet.

Hemp Composite Construction

Aside from a tweaked truck and deck geometry, the big news for this edition of the Samba is the Hemp and Maple composite construction. We’ve been playing with alternatives to fibreglass since before the pandemic, and hemp has been a front runner for some time now as a glass replacement.

By using a naturally grown material, we can reduce energy costs and open the door to a biodegradable composite – so offcut disposal is less of an issue. It rides very similarly to fibreglass, with loads of energy return, and a familiar “pingy” flex pattern. The original Samba was birch, then we moved to maple, and we included fibreglass for the 2016 edition. Now we’re stoked to move things forward again with Hemp – reducing our impact whilst improving on the ride of the original.

Carve it up!

This edition of the Samba has some mountainous artwork by Ben Williams, simple and inspiring!

With a slew of build options to choose from, the Samba is rocking premium components whatever you go for. Carving around, pushing drifty turns down a hillside, or pushing and pumping to work – the Samba has you covered.

Back to top

Lush Longboards Samba Natural Features...

  • 7 Ply Maple

    7-fi-icon

Back to top

Lush Longboards Samba Natural Reviews

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Longboard Skateboard Makers Since 1999!
Average rating:  
 5 reviews
 by Jersey

so beautiful,i like it rather than drop cat;-)

 by Marc Carter

I own 2 lush boards, plus another from a different brand. Also a short board. My first ride felt very odd, it was because I had Been riding it backwards. One quick call to the shop sorted that issue out. That odd feeling has now been replaced by the true natural of this board. It such an amazing ride. I have never riden something as enjoyable. The carves are amazing, the pump is also. Deep carving down steep hills is so much fun. Banks are too. It's turn like a dream, pulls out of carves, recovys well. Its like to ride fast. Pumping needs it, but it seems to handle it well. I have hit 20 mph a few times Its a pleasure to own one, a joy to ride.

 by Andy L

One quick demo on this board & I was hooked! This thing turns like crazy and the pop you get out of the turns is unreal. As I became a little more confident I found it very easy to get the back end to break traction and speed check out of turns. I bought the Pro complete with the Emperor wheels. Although I am already finding the limit of their grip, I believe this was the right choice for me. I might consider upgrading to some Cult Raptures in the future, but I like the controlled slide I'm getting. The low centre of gravity combined with the lean angle and flex of the deck puts a massive strain on the wheels! This is obviously no downhill board. However, I'm probably taking it up to about 20mph with no speed wobbles despite having the trucks super loose. Again the low centre of gravity also playing a part here. It also helps a lot when pushing. I did the Bath to Bristol push yesterday and then rode home. Over 25km in total according to my gps and have no thigh ache today. I also find the board very easy to pump and whilst practicing this I actually overtook people who were pushing yesterday! The pay off for having such a super low, flexi deck is that it will inevitably make contact with the ground occasionally, however mine is holding up well after a months abuse you would have to look hard to notice any damage. I took the Samba to visit an old snowboard mate who's never skated last week. He found it super easy to ride and is now hooked and looking at buying one too. This is something I would usually discourage as we will be riding together if he takes the plunge. However, I found it impossible to recommend a better board to him.

 by AndyY

I've skated over the years, but I'd never been on a longboard. I was originally looking at a Freebyrd to start with, but I'm so glad I went for a Samba in the end... It skates like a dream, carves like a snowboard and just puts a smile on your face. Instantly accessible and beautifully made; I put the order in on a Fri p.m. and it arrived Monday a.m! Special thanks to Adam for his patience and great advice. Simply the best skate shop I've ever dealt with. I'll wear the t-shirt with pride! Cheers guys!

 by Mad dog

I was super stoked to see lush coming out with a dedicated carving setup! I got the Elite Complete cause I wanted the most wheel grip possible and shipping took about a week, which was much faster than I expected.Beautiful thick dark finish on the wood and the trucks and wheels look super sick. On my first ride it took some getting used to, the trucks just keep turning into no man's land and never hit a barrier that you'd feel with other loosened trucks. You have to get it up to speed a bit to throw it around because of the wideish wheel base, but I love the bounce you get out of each turn and I'm even able to pump up a slight hill no problem. I love how much weight I can throw into it and the turning radius is unreal. I'ts even pretty stable at speed because of the drop deck; I've never gotten speed wobbles even though I've kept the trucks super loose. Once I started getting comfortable and digging in, I started to get a feel for the deck's limits. the wheel grip is not as sticky as i'd like, I ride a lifted fishboard with carving trucks that has more stick on old big zigs than the stock setup did on day 1, but when the wheels do start to slide it's extremely controllable and feels totally safe and smooth, not like you're destroying your wheels. I'm not sure if it slides because the deck is flexing and taking pressure off the wheels or if the wheels just aren't as sticky as I'm used to, but I plan on switching out the wheels eventually and finding out. Another problem that I ran into is that when I really started to throw the board around the deck scraped the ground at the peak of my turn a few times, and now there are a few unfortunate gashes in the beautiful finish on the rails. I had a feeling that clearance was going to be an issue with center mounted trucks and a dropped flexy deck, but for the most part it was totally fine for 98% of the thrashing I was able to give it over a few days. I like the Idea of having the grip tape go all the way to the last possible edge of the deck and it feels great on your feet, but it does make the board extremely uncomfortable and awkward to carry up a hill, and I've sliced up my fingers pretty good carrying it around since i got it, I found myself having to carry it around like a pizza box so I could protect my fingers. I think I might cut a strip of tape out of the middle so I can actually hold the thing. I think I'm gonna ride the stock wheels for a while more, but I'm excited to put on some stickier wheels with more clearance (big zigs...) and see if I can get it to hug the ground a bit more. hopefully the slide I'm getting isn't created by the shock absorption of the x-flex deck, but it wouldn't be a horrible trade off for the amount of bounce you get out of the turns. I have a feeling that with a taller, stickier set of wheels, this board will be a 4.5/5 for me. Add a little more clearance (or fatter wood for less bounce) and take away a bit of length to and it would be an automatic 5/5 for what I'm looking for. If I had to do it again, I'd get the lower tier setup and use the stock wheels for sliding and get my own sticky wheels. I definitely have an ideal sticky turny board feel in my head that nothing may ever meet, but this board came pretty dang close. Overall it's a super fun board and I would totally recommend the board if you're looking for a smooth turny ride with a little bit of slide.

Back to top

Lush Longboards Samba Natural FAQ's

  • Question: Can I buy this board as a deck only?

    - We're sorry but we usually only offer the Samba built as a complete. The whole ride is built around a very specific truck setup, and we want everyone to experience the carving feeling the way it was intended. We have not really found another truck combination that works as well as this. Higher angle trucks don't work well at all.

    That said, if you already own some Sabres or other low angle trucks, and you're really desperate, drop us a line and we'll see what we can do. :)

  • Question: How does the Samba compare to a Carver Skateboard or "Surfskate" board?

    - Even though they're both trying to replicate the feeling of riding a surfboard, they're radically different setups.

    The Carver Skateboard is a medium mini-cruiser board shape that uses a regular street truck in the rear and a "Carver Truck" at the nose. This is essentially a regular skate truck mounted on a castor - like a shopping trolley - the idea being that the front of the board can turn like crazy, while the back of the board acts as the pivot.

    The Samba is a different approach to the surfskate skateboard concept entirely. Rather than using a surfskate truck paired with a regular street truck, we've specced a pair of longboard trucks and altered the geometry and pivot position with the deck profile, with the sole aim of creating maximum lean and turn throughout the whole board.

    As a result, the Samba "leans," while the Carver Surf Skate "pivots." For us, the leaning feeling is an essential part of carving hard on a surfboard - there's no better feeling than cranking the board over and digging a rail in.

    There are many other differences too - the Samba has a lot of energy return from carves due to the composite construction, whereas Carver boards or "surfskates" tend to be just maple. That same construction, paired with the larger wheels, also gives a smoother, faster ride. Most surfskates have a very high ride height due to the extra castor pivot under the front truck - the Samba is super low and therefore way more controllable and easy to push around. Those Carver Trucks also add a lot of weight - despite being a bigger board, the Samba is lighter than a lot of surfskates and "skate carvers."

    We believe that if you want to pivot, you should get a board with a kicktail and learn to skate off the back foot, not the front foot... if you want to lay down some fat, rail-to-rail surf style carves, the best carving board out there is Samba!

  • Question: I've got an original Samba longboard. Should I upgrade?

    - It's a fair investment - but we think there's enough differences between the 2017 Samba and its older cousins to make it worth it. The deck is way flexier and bouncier, thanks to it's X-Flex construction, which gives much better energy return. It's shorter and easier to throw around than the older Samba's. And the new Sabre truck setup feels a lot smoother than the older Seismics. If you've got an old Samba, chances are your board is at least seven years old anyway... time for a fresh setup!

  • Question: What alternative wheels do you recommend for the Samba?

    - You want something as grippy as possible! We ship this with Cult Emperors (Pro complete) or Raptures (Elite complete). To be honest, we think that the Raptures are really worth the extra spend, as they are a lot grippier than the Emperors. Any big, wide downhill wheel with a lot of grip will be good - but don't go bigger than 75mm otherwise you'll get wheelbite. Something a bit smaller like a 70mm Landyachtz Biggie Hawg might work, but they're centerset, so again watch out for wheelbite!

    So our official recommendation remains Cult Raptures, but if you really want to try something else, keep it under 75mm, and make sure that you choose an offset core.

  • Question: Can you use this board for downhill if you put harder bushings in?

    - You'd think that the super-low ride height and low angle trucks would make the Samba amazing for going fast on. And you're right - except that the deck is very, very flexy. If you were to put harder bushings in and bomb a hill, you'd be fine until you got to a corner and tried to track a line. We recommend a stiffer deck like the Machine 3D X-Tuff or Grifter if you want to skate fast!

  • Question: How does the Samba ride vs the Loaded Icarus?

    - Despite both being "Carving longboards," the Samba and the Icarus get there quite differently. Both feature wood/glass constructions to give a good energy return, but that's about where the similarities end.

    The Loaded Icarus is a drop-through board, whereas the Samba is a drop-up board with lowered riding platform - so it's a lot lower to the ground, which means more sliding control and an easier push.

    The Loaded Icarus has a much more complicated concave, with wheel flares to prevent wheelbite and provide reference points for your feet, whlie the Samba is dropped-down with huge wheel cutouts - so it doesn't really need the 3D concave that the Loaded has.

    The Loaded Icarus has small kicktails, which the Samba lacks - so you could do some dancy stuff on the Loaded, but if that's what you're into then you're better off checking out the Symbian 3D or the Freebyrd. The Samba is built to carve and nothing else!

    You can put any trucks you like on a Loaded Icarus - but this does mean that the deck isn't optimised for a single truck setup like the Samba, so if you're just looking to carve like crazy, the Samba will turn a lot harder and faster.

    They're both built to carve, but out of the box, the Loaded is more of a general cruising setup, whereas the Samba is all about turning so hard your face melts!

  • Question: Is it better for town cruising them Symbian?

    - These are two quite different decks. The Symbian is much stiffer, and has kicks for dancing and freestyle moves. We'd recommend it if you want to do some dancing or learn some sliding down your local hill.

    The Samba turns a lot more and has a much nicer flex - so if cruising around and carving is your aim, the Samba is a way better bet.

Ask us a question about this product:

» Contact us

Call us :
(+44)117 933 2833

 

Send us stuff :
Arch 4 Berkeley Court, Earl Russell Way, Lawrence Hill, Bristol BS5 0BX, United Kingdom

 

Spainish Addess :
No 28 Juncon, El Chaperell, 29110 Monda, Málaga

 

Email:
info@lushlongboards.com

First Name : Required
Last Name : Required
Email Address : Required
Country : Required
Question : Required
Newsletter :

Back to top

View all Lush Longboards